How to Install Stock ROM on Alcatel 1S 2020 [Firmware Flash File/Unbrick]

How to Install Alcatel 1S 2020 5028Y Firmware Flash File

Before installing the Stock ROM on your Alcatel 1S 2020, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

• Supported device: Alcatel 1S 2020 5028Y
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
• Download Drivers and Tools: VCOM drivers, SP Flash Tool and Android USB Drivers

Download Flash Files

Software Details	Download Link
Flash File Name: 5028Y-2CALRU12 File Size: 1.4 GB Android Version: 10	Download Link

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. Make sure you follow and download all the required files and flash tools on your PC.
2. Open the flash tool exe file to open the SP Flash Tool User Interface
3. Once your load the SP Flash tool UI, Tap on Download option
   
4. In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
   
5. You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
6. Once you load the file, click the Download button
7. To start the upgrade process of stock ROM on your Alcatel 1S 2020, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
8. When the phone connects, your device will start upgrading the stock firmware
9. You need to wait for a few minutes to complete the upgrade process.
10. Once the flashing process completes, you will find a green button which means a successful upgrade.
11. That’s it! You can reboot your Alcatel 1S 2020

Follow our full-depth video guide below:

Wach Video Tutorial

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Alcatel 1S 2020 5028Y device successfully. Feel free to ask in the comments below for any queries.